Sant Cebrià de Vallalta (Barcelona - Spain)
sauleda@frenossauleda.com
Tel. (+34) 93 763 11 20 Fax (+34) 93 763 10 61
| Responsable | R. Antich |
|---|---|
| Revision | 1 |
| Revision date | 29/01/2024 |
FAG18/15
FAG18/15 is a green moulded friction material. The basic materials which are used are: phenol resins and rubber as a link system with frictional modifier agents, also contain aramind fibers and fine iron shavings to enhance its strength which help to establish the friction value by conducting heat from the operating surface. Offers excelent wear and temperature resistance, It is rigid material with good hardness and mechanical strength. FAG18/15 fully cured and is suitable for bonding and riveting.
Material data
Friction properties
| Static Friction Coefficient (@15bar, from the box) | 0.50±0.05 μ |
|---|---|
| Static Friction Coefficient (@15bar, 100ºC) | 0.45±0.05 μ |
| Dynamic Friction Coefficient (10bar, 10m/s) | 0.52±0.05 |
| Wear Rate (@10bar, 15m/s) | 30 (at 150 ºC) |
| Tº Fading (@10bar, 10m/s) | >450 °C |
Physical properties
| Hardness (DIN53505) | 80±5 Shore-D |
|---|---|
| Specific Gravity (ASTM D792) | 2.10±0.1 gr/cm3 |
Mechanical properties
| Tensile Strength (ASTM D638) | 15,2±2 N/mm² |
|---|---|
| Compressive Strength (ISO 844:2014) | 160±5 N/mm² |
| Shear Modulus (ASTM D2344-00) | 2100±100 N/mm² |
| Poison coefficient (ASTM D638) | 0.26±0.03 |
| Young Modulus (ASTM D638) | 5220±100 N/mm² |
Recommended Working Values
| Tº Max. Continuous Operation | 400 °C |
|---|---|
| Tº Max. Intermittent Operation | >450 °C |
Material type
Rigid
Appearance / Formats
Applications
Callipers for industrial applications · Clutch buttons · Friction washers · Heavy loaded Winches and Cranes · Heavy vehicle clutches · Heavy-duty industrial machinery
Price Level
€€€
Reach (EC)1907/2023 - RoHS 2015/863/EU
Yes
Others
| Recommended Mating Surface | Perlitic cast iron, hardness HB150-200 |
|---|---|
| Recommended Adhesives | Thermosetting adhesive |
| Oil Resistant | Yes |
Charts
