Sant Cebrià de Vallalta (Barcelona - Spain)
sauleda@frenossauleda.com
Tel. (+34) 93 763 11 20 Fax (+34) 93 763 10 61
| ID Material | 35 |
|---|---|
| Responsable | R. Antich |
| Revision | 0 |
| Revision date | 30/07/2021 |
FAG/TW
FAG/TW is a green moulded friction material. The basic materials which are used are: phenol resins and a NBR as the bonding system, organic and mineral fibres and friction modifiers. Offers high wear and temperature resistance, It is rigid material with good hardness and mechanical strength. FAG/TW fully cured and is suitable for bonding and riveting.
Material data
Friction properties
| Static Friction Coefficient (@15bar, from the box) | 0.50±0.05 μ |
|---|---|
| Static Friction Coefficient (@15bar, 100ºC) | 0.50±0.05 μ |
| Dynamic Friction Coefficient (10bar, 10m/s) | 0.47±0.05 |
| Wear Rate (@10bar, 15m/s) | 20 (at 150 ºC) |
| Tº Fading (@10bar, 10m/s) | >350 °C |
Physical properties
| Hardness (DIN53505) | 90±5 Shore-D |
|---|---|
| Specific Gravity (ASTM D792) | 2.00±0.05 gr/cm3 |
| Ignition Loss (ASTM D7348) | 40±2 % |
| Acetone Extraction (ASTM D494) | 2±0.2 % |
| Thermal Conductivity (ASTM E1952) | 0.61 W/m°K |
Mechanical properties
| Tensile Strength (ASTM D638) | 14±5 N/mm² |
|---|---|
| Compressive Strength (ISO 844:2014) | 170±5 N/mm² |
| Poison coefficient (ASTM D638) | 0.24±0.03 |
| Young Modulus (ASTM D638) | 7500±200 N/mm² |
Recommended Working Values
| Tº Max. Continuous Operation | 300 °C |
|---|---|
| Tº Max. Intermittent Operation | 400 °C |
Material type
Rigid
Appearance / Formats
Applications
Forging machinery · Gear discs for industrial devices · Heavy loaded Winches and Cranes · Heavy-duty industrial machinery · Punch-die press blocks · Rings segments for machinery · Torque limitator
Price Level
€€€
Reach (EC)1907/2023 - RoHS 2015/863/EU
Compliance
Others
| Recommended Mating Surface | Perlitic cast iron, hardness HB150-200 |
|---|---|
| Recommended Adhesives | Thermosetting adhesive |
| Oil Resistant | Yes |
Charts
