Sant Cebrià de Vallalta (Barcelona - Spain)
sauleda@frenossauleda.com
Tel. (+34) 93 763 11 20 Fax (+34) 93 763 10 61
| ID Material | N 3 |
|---|---|
| Responsable | R. Antich |
| Revision | 7 |
| Revision date | 28/05/2024 |
MC3
MC3 is a rigid, semi-metallic, moulded material. It is a resin based material, and it uses rubber powder as a linkage, along with friction modifier agents, mineral fibers and fine copper shavings to enhance its strength. It has high temperature dissipation capacity from the operating surface. MC3 has a high and very stable friction coefficient, and excellent resistance to fading. MC3 is a fully cured material and is suitable for bonding & riveting.
Material data
Friction properties
| Static Friction Coefficient (@15bar, from the box) | 0.60±0.05 μ |
|---|---|
| Static Friction Coefficient (@15bar, 100ºC) | 0.65±0.05 μ |
| Dynamic Friction Coefficient (10bar, 10m/s) | 0.62±0.05 |
| Wear Rate (@10bar, 15m/s) | 40 (at 150 ºC) |
| Tº Fading (@10bar, 10m/s) | >400 °C |
Physical properties
| Hardness (DIN53505) | 88±5 Shore-D |
|---|---|
| Specific Gravity (ASTM D792) | 2±0.10 gr/cm3 |
| Thermal Conductivity (ASTM E1952) | 0.31±0.01 W/m°K |
Mechanical properties
| Tensile Strength (ASTM D638) | 15±1 N/mm² |
|---|---|
| Compressive Strength (ISO 844:2014) | 126±5 N/mm² |
| Shear Modulus (ASTM D2344-00) | 2154±100 N/mm² |
| Poison coefficient (ASTM D638) | 0.23±0.03 |
| Young Modulus (ASTM D638) | 5300±100 N/mm² |
Recommended Working Values
| Tº Max. Continuous Operation | 400 °C |
|---|---|
| Tº Max. Intermittent Operation | 500 °C |
Material type
Rigid
Appearance / Formats
Applications
Forging machinery · Heavy duty static applications · Heavy-duty industrial machinery · Machinery Mining industries · Punch-die press blocks · Ring segments
Price Level
€€€
Reach (EC)1907/2023 - RoHS 2015/863/EU
Compliance
Others
| Recommended Mating Surface | Perlitic cast iron, hardness HB150-200 |
|---|---|
| Recommended Adhesives | Thermosetting adhesive |
| Oil Resistant | Yes |
Charts
