Sant Cebrià de Vallalta (Barcelona - Spain)
sauleda@frenossauleda.com
Tel. (+34) 93 763 11 20 Fax (+34) 93 763 10 61
| ID Material | R1 |
|---|---|
| Responsable | R. Antich |
| Revision | 8 |
| Revision date | 30/07/2021 |
RP01
RP01 is black rigid friction material which consists phenol resins as a bonding system, short fibres, friction modifiers and fillers. This offers a medium high static co efficiency and an excellent mechanical resistance, very successful for wind turbine components. RP01is fully cured and suitable for bonding and riveting.
Material data
Friction properties
| Static Friction Coefficient (@15bar, from the box) | 0.55±0.05 μ |
|---|---|
| Static Friction Coefficient (@15bar, 100ºC) | 0.50±0.05 μ |
| Dynamic Friction Coefficient (10bar, 10m/s) | 0.40±0.05 |
| Wear Rate (@10bar, 15m/s) | 60 (at 150 ºC) |
| Tº Fading (@10bar, 10m/s) | >310 °C |
Physical properties
| Hardness (DIN53505) | 80±5 Shore-D |
|---|---|
| Specific Gravity (ASTM D792) | 1.75±0.05 gr/cm3 |
| Thermal Conductivity (ASTM E1952) | 0.49±0.01 W/m°K |
Mechanical properties
| Tensile Strength (ASTM D638) | 19±5 N/mm² |
|---|---|
| Compressive Strength (ISO 844:2014) | 110±5 N/mm² |
| Poison coefficient (ASTM D638) | 0.24±0.03 |
| Young Modulus (ASTM D638) | 5506±100 N/mm² |
Recommended Working Values
| Tº Max. Continuous Operation | 200 °C |
|---|---|
| Tº Max. Intermittent Operation | 300 °C |
Material type
Rigid
Appearance / Formats
Applications
Damper Technologies · Heavy duty static applications · Holding Mechanical Structures · Yaw brakes
Price Level
€€€
Reach (EC)1907/2023 - RoHS 2015/863/EU
Compliance
Others
| Recommended Mating Surface | Perlitic cast iron, hardness HB150-200 |
|---|---|
| Recommended Adhesives | Thermosetting adhesive |
| Oil Resistant | Yes |
Charts
